Presupuesto VallaFence costs & quotes
Galvanised 2D mesh fence on a concrete base, finished section
Comparisons

How to lower the cost of a fence without cutting quality

When a quote comes in above budget, the temptation is to look for a lower price elsewhere. Often the better route is to adjust what is being built. These are the options worth comparing, and the ones to avoid.

ComparisonsLast reviewed: Bauman Raymond Attila

Why adjust scope rather than quality?

In short: thinner posts or shallower footings save little and risk a lot; a different scope can save more and lose nothing.

The parts of a fence that hold it up – footings, posts, pillars – are not where to economise. A fence that leans or moves after a windy winter costs far more to put right than it saved. The same applies to waste and removal: leaving them out does not make them disappear.

Scope is different. Height, where the low wall goes, which sections are done together and which infill you choose can all change the quote without weakening anything. Our fence cost factors page shows which lines each choice affects.

Can height and wall placement make a real difference?

In short: yes – lowering the height or using a low wall only where it matters often changes several lines at once.

Height affects posts, footings and infill together, so a modest reduction can move several lines. Check that the lower height still meets your needs and local rules before deciding.

The low wall is often the biggest single line. Many owners want it on the road side for appearance and privacy, but not along the back of the plot. A wall at the front and a fence on posts at the back, perhaps with a concrete plinth to stop digging, is a common and sensible combination. Our cost by fence type page compares the drivers.

Anthracite 2D double-wire mesh fence on a light concrete base in a lawned garden
Anthracite 2D double-wire mesh fence on a light concrete base in a lawned garden

Does doing everything at once save money?

In short: often, because setup, travel and setting out are shared across more metres.

Some costs barely change with length: travelling to site, setting up, setting out, handling the start and end of each run. If you order three sections in three separate jobs, you pay those fixed items three times. In one job, they are shared.

This is not always possible for every budget, but it is worth asking for a quote that covers the whole boundary and then deciding which sections to build first. Our page on fence cost per metre explains how fixed items affect the rate.

Which infill and finish choices affect the price?

In short: the infill type, its finish and the fixing system all carry cost; compare options side by side in one quote.

Between two posts you can have chain link, rigid mesh, slats, boards or precast panels, and each comes in several finishes. A simpler finish or a standard colour may be more readily available than a special one. Ask for two infill options priced in the same quote, so the shared groundwork lines are identical and only the difference shows.

Supplying material yourself can sometimes help, but it shifts responsibility to you; our post on fence price myths covers the pitfalls.

What should you never cut to save money?

In short: foundations, end and corner posts, waste handling, and the technician's check where a wall retains soil.

Some items look optional on paper and are not. Footings and end posts carry the fence. Waste handling is required by the rules, as explained in our guide to old fence removal and waste. And if your boundary holds back soil, a fence is not a retaining wall: a technician such as an arquitecto, aparejador or ingeniero has to assess it first.

If the budget still does not fit after adjusting scope, consider building the most important section now and the rest later, using the same quote structure.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
Our specialist sites by fence type
FAQ

Frequently asked questions

What is the easiest way to lower a fence quote?

Adjust scope: reduce height where possible, use a low wall only where it matters, and group sections into one job.

Can I use thinner posts to save money?

We do not recommend economising on the structure. Posts and footings carry the fence, and failures cost more to fix than they save.

Does a lower fence always cost less?

Usually, because posts, footings and infill can all be lighter. Check it still meets your needs and local rules.

Is a wall at the front and mesh at the back a good compromise?

For many plots, yes. It puts the more substantial work where it is seen and uses a lighter fence elsewhere.

Does grouping all sections into one job help?

It usually spreads fixed costs such as travel and setup over more metres.

Should I choose a simpler finish?

Compare options side by side in one quote. A standard finish may be easier to source than a special one.

Can I skip waste handling?

No. Waste has to go to an authorised destination. Leaving it out of a quote only hides the cost.

Can I supply my own material?

Yes, we can work with it. Confirm the list with us first, and remember you take responsibility for its suitability and delivery.

Can I build in phases?

Yes. Ask for a quote covering the whole boundary, then decide which sections to build first.

Is a plinth under mesh worth it?

It adds a line, but it stops digging and gives a cleaner finish. It is often a good alternative to a full wall.

What if a fence must hold back soil?

Then it is a retaining wall question, and a technician must assess it. Do not try to save by skipping that step.

Get a quote

Get an itemised quote for your fence

Send photos and the approximate length by WhatsApp or e-mail. We price every stage line by line, without commitment.